Friday, April 1, 2016

Nature's Wonderland, Teddy Roosevelt and the Thunder Mesa Mining Co.

Today, the Thunder Mesa Mining Co. still offers excursions aboard vintage steam trains through Nature's Wonderland National Monument. Thanks to Teddy Roosevelt, this national treasure has been preserved for the enjoyment of all since 1906.


In the late summer of 1906, tensions were high in Thunder Mesa Country. Mining revenues were down, and the TMMC, and its parent road, the Santa Fe, Denver & Carolwood began pushing into new territories, including those controlled by the Estrella & Sonora Grande and Calico Gold Company. Naturally, the other companies pushed back, and by August, the battle over gold and silver claims in this wild canyon country had escalated to a fever pitch. It didn't take long for rival newspapers and political gangs to get in on the fight and soon they were tossing incendiary lies and insults in all directions. Before long it was greatly feared that conditions would deteriorate into physical violence. Armed toughs from Calico and banditos from San Lorenzo were quietly being recruited by both sides and an all out range war seemed imminent.

Diminutive but dangerous, the notorious Pequeño Brothers arrive in Thunder Mesa to fight as mercenaries on behalf of the railroad. A railroad that, ironically, they had been suspected of robbing in years passed.

From the border country down south came El Puerco and his gang of bandits, ready to shed blood on behalf of the E&SG.


By the fall, none other than the President himself was preparing to intervene in the fracas. Traveling by private rail car, Theodore Roosevelt just happened to be on a secret hunting trip along the fertile bottomlands of Big Thunder Creek when he was briefed on the ensuing hostilities. After quietly surveying the natural wonders of the area (and shooting a dozen elk, two bears, a catamount, a duck, two armadillo, six coyotes, and three chipmunks), our 26th president made his presence known (as the story goes, he announced his presence by shooting a shot glass off the nose of the buffalo head in Big Thunder Saloon). He called a meeting of all aggrieved parties in what came to be known as the "Council of Calico." As it turned out, the President had been thoroughly delighted by the amazing buttes, canyons, geysers, and glittering caverns of Thunder Mesa Country and had concluded that the region deserved to be protected and preserved for the enjoyment of future generations.

"Providence," he said, "has been at work upon this land for untold ages. For here has been gathered an unmatched collection of natural curiosities and splendid scenic wonders. Verily, this "Nature's Wonderland" is an irreplaceable treasure of the United States and must be protected from the greed and petty concerns of short-sighted men."

Then, by presidential decree, he set aside the wild country on all sides of the TMMC right-of-way, excepting only existing claims, and effectively hemming-in the land hungry railroad. Invoking the newly minted Antiquities Act, and with the stroke of a pen, TR created Nature's Wonderland National Monument.

It is believed that TMMC founder, Elias Homage, first coined the term "Nature's Wonderland" to describe the unique wild country near Thunder Mesa, but it is generally agreed by historians that our 26th president, Theodore Roosevelt, was the one most responsible for popularizing the region in the public imagination.


Of course, the railroads grumbled at first, but it soon became clear that the official designation and endorsement of the President himself would be a boon to the area. By 1905, the writing was on the wall as once rich finds at Calico and Big Thunder began to play out. This, in turn, had lead to the mining company's overreach into new territories already controlled by the Calico Gold Co. and Estrella & Sonora Grande. The "Roosevelt Solution" effectively put an end to the conflict while creating a rich new revenue stream for the TMMC.

TMMC management wasted no time in promoting tourism within the new monument as new excursion trains were quickly added to the schedule. Old ore gondolas were converted to carry passengers and secondhand coaches were procured from the Santa Fe, Denver and Carolwood to fill out the new trains. For its part, the SFD&C began to promote direct rail service to Thunder Mesa from Carolwood, Denver and Discovery Bay. By decade's end, tourism had replaced mining as 80% of the TMMC's revenue. In 1910, the TMMC also connected with the struggling Estrella & Sonora Grande Ry. near Lone Rock, and eventually came to control many of that line's assets.

A Thunder Mesa Gazette extra from 1910 tells of the joining of the E&SG and the TMMC at Lone Rock.


Though the mines near Thunder Mesa were largely played out, the rich diggings around Calico continued to produce gold bearing ore well into the new century and the Calico Gold Co. remained independent until the crash of '29 forced a sale of its assets to the TMMC. Calico itself became a ghost town, and the once legendary mining camp merely another attraction for tourists aboard Thunder Mesa's colorful excursion trains.

It didn't take long for TMMC management to catch on to the possibilities of tourism revenue and soon advertising posters like this began to show up in railway stations across the country.

By the early 20th Century, rail travel had made it possible for families to tour the west and see the sites for pleasure. Railroads like the SFD&C and the TMMC were quick to take advantage of this trend.


After 1906, Theodore Roosevelt was never again seen in Thunder Mesa Country. However he did manage to visit other spectacular regions and preserve their natural wonders for future generations as well. As president, Roosevelt created five national parks and used the landmark Antiquities Act to unilaterally create 18 national monuments, including the Grand Canyon. He also set aside 51 federal bird sanctuaries, four national game refuges, and more than 100 million acres' worth of national forests.

Roosevelt's chance visit to Thunder Mesa was a classic case of the right man being in the right place at the right time. Without his wise intervention, it is doubtful that the railroad would have survived much beyond the boom times of the late 19th and early 20th centuries, and the spectacular region known as Nature's Wonderland might never have been preserved. Without Roosevelt, another chance visit by Walt Disney, Ward Kimball and Roger Broggie might never have occurred in the early 1950s, leading to a "rediscovery" of the Thunder Mesa line and sketchbooks full of ideas for a magical little park being planned for Southern California. But that legendary visit is a story for another day.

Monday, February 22, 2016

Building Horse Thief Canyon: Part I

After a couple month's break, I'm back to work on the railroad, jumping right back into a big scenery project. Ive made some major and minor changes to the overall plan since the beginning of the year and there will be much more on that in a future post. For now I'd like to bring things up to date on the scenery being built around Hanging Rock in what I'm now calling the Horse Thief Canyon section of the TMMC.

The new cliff wall under construction below Hanging Rock. I'm trying something new on these big canyon sections, building the rockwork almost entirely from extruded polystyrene foam insulation board - or EPF for short (that's the pink foam board from your local home center). In the past I've used it mostly as a scenery base and finished with other techniques, but now I've found a way to carve the foam layers themselves into a convincing representation of sandstone. The Kato power pack nestled into the cliff base will provide DC control for an On18 mining tram running between Calico and Big Thunder Mine - much more on that in a future update.


This is a big project, and I'll be spreading it out over several updates. In this first part, I want to concentrate on the cutting and carving techniques used on the pink extruded polystyrene foam board (EPF). This insulation board is lightweight, relatively inexpensive, and has been used by model railroaders for many years as a scenery base. While building some rockwork for Rainbow Caverns, I hit on a new technique (new to me) for carving rock textures into the foam using a sanding bit in a Dremel rotary tool. I was so pleased with the results that I decided to use the same method on the deep canyon sections of the layout too. It's a little labor intensive, but really no more so than my previous method of stacking foam layers and texturing with Sculptamold. I've got a ton of rockwork to do, so whatever method I choose is going to take awhile, but these EPF canyon walls will end up weighing much less than the equivalent amount of plaster or Sculptamold. An important consideration if I should ever have to move the layout.

It's easy to add access hatches with EPF scenery. Here I've created a removable section of cliff below Hanging Rock so I can access the wiring back there when needed. Just push in at the corner and then slide the section out. A similar removable section will also be built into the cliff wall on the other side of the canyon.

Overall view of the Calico and Horse Thief Canyon sections as scenery work begins. All of that space between track level and the bottom of the benchwork will be filled with EPF rockwork.

The basic tools and materials used on the foam rockwork. 
  • 1" thick EPF insulation board (purchased in 4' x8' sheets)
  • Sanding block - medium to fine grit
  • Loctite Power Grab adhesive and caulking gun (the best adhesive for EPF)
  • Dremel rotary tool and various sanding bits
  • Razor saw
  • Hot wire foam cutter
  • Various hobby and utility knives


The Slot Canyon

Down below the bridges at Hanging Rock is a deep, serpentine defile known to the locals as Horse Thief Canyon. It's a classic Southwestern "slot" canyon, much narrower than it is wide; the kind often found worming back into the sandstone cliffs of Thunder Mesa country. This particular slot canyon is about 72 scale feet deep but only averages about 12' wide. A perfect hideout for horse thieves and rustlers - as long as it isn't flash flood season.

Slot Canyon near Page, AZ. This is kind of the look I'm after with Horse Thief Canyon.

Here I've made a start on Horse Thief Canyon itself, cutting, carving and shaping the bottom three layers. This bottom section will be brought to a high state of finish before I move on to the next three layers of depth. That way, I won't carve myself into a corner by not being able to reach the depths of the canyon for painting and details.

Each rock layer is cut to shape with a Woodland Scenics hot wire cutter, and then the exposed edges are carved into rocky textures using a variety of sanding bits in a Dremel Tool. The layers are then stacked and glued together using Loctite Power Grab Adhesive (see video below).

One more layer of foam added and some spackling to start blending things together. In my experience, common household spackle works just as well as Woodland Scenics foam putty. In fact, I strongly suspect it's the exact same thing - but at less than half the price. I'll let this dry overnight and then it will get a base coat of tan latex paint.

When complete, the canyon will seem to go on forever since it will be impossible to see the end due to built-in view blocks. At night, the flickering glow of an outlaw camp will be visible just around the bend.


To wrap things up for this installment, here's a step-by-step how-to video on my EPF cutting and carving techniques.


Thanks for tuning in, amigos. Next time up we'll do some painting and finishing of the rockwork in Horse Thief Canyon. Adios for now!

Monday, January 11, 2016

10 Tips for Modeling Structures With Character



The January 2016 issue of Model Railroad Hobbyist Magazine is here, and with it, my latest column: 10 Tips for Modeling Structures With Character. Read my column and the entire e-zine for free here!

Wednesday, December 16, 2015

Unfinished Business

As 2015 draws to a close, it's only natural to look back at what was accomplished in the past year and to think about all that still needs to be done. The TMMC has come a long way this year, with the entire mainline now complete through the expansion areas, a more logical layout for the town, and scenic work well underway in Rainbow Caverns and Hanging Rock. Still, there's much yet to be done. So many projects in fact that at times it can be a little overwhelming and I start to wonder if maybe I haven't bitten off more than I can chew. Thunder Mesa isn't really a very big model railroad, but the high level of detail, scratchbuilt structures, animation and lighting effects means that progress can be rather slow at times. Still, my enthusiasm for the project remains high, and there are a number of projects that I'm looking forward to tackling in the new year.

So, without further ado, here's a look ahead at some of the TMMC's "unfinished business" that I'd like to get done in 2016.

Geyser Gulch

This lone, temporary trestle bent has been standing in for a real bridge over Geyser Gulch for longer than I care to admit. I've drawn up plans for the bridge, purchased materials, and even figured out a way to make "Old Unfaithful" geyser erupt in the background. I just need to make time to finally finish this signature scene.

Thunder Mesa Mill

Just to the right of Big Thunder Creek stands this paper mock-up of Thunder Mesa Mill, based loosely on the boarding area structure for Big Thunder Mountain at Disneyland. This is where all of the ore from the mines at Calico and Big Thunder Camp gets processed before being shipped out to the wider world. As such, it's pretty important to the economic lifeblood of the railroad. It's also a signature scene that really helps to establish the story of the railroad. Replacing this mock-up with a fully detailed, scratchbuilt structure is high on my list of priorities for the new year.

The Backdrop

Don't be fooled by the pretty photos I post, most of the walls around the TMMC layout are still embarrassingly bare. I've been using temporary backdrops for most photos and Photoshop composites for the really arty ones. But help is on the way. The above image is a low-res version of a digital painting I created that will be printed upon 3oz vinyl scrim and then affixed to the layout room walls. This will give me a seamless sky backdrop that wraps around three sides of the layout. Landscape features like distant buttes and mesas will then be painted on 1/8" hardboard and mounted between the 3-D layout scenery and the sky backdrop. This should make for some dramatic scenes that look like they go on forever.

Thunder Mesa Town

Hoo-boy, there's loads to do here. Other than the depot and Big Thunder Saloon, nearly everything in town is still in the paper model mock-up stage. As usual, I'll have to take it one structure at a time and finish what I can. It's highly doubtful that I'll get all those little building done in the coming year, but I would like to make a good start on the scenery and ground cover and then tackle as many of them as I can. We'll see what happens.


Turntable and Engine House

Well, at least the water tank is finished (but that might be moving to Hanging Rock). The current turntable here is unpowered and a hold-over from an earlier version of the railroad. I'd like to replace it this year with one of the fine A-frame TT's from Kitwood Hill Models. The engine house is planned as a white-plastered stone structure to harmonize with the adobe structures of nearby San Lorenzo. Time will tell if that plan pans out or I decide to go with something else. Obviously, the turntable approach track and engine house tracks are waiting for more permanent structures to be built. All of the track in this area needs paint, ballast and final detailing.

Rainbow Caverns and Big Thunder Camp

These two go together because one sits right on top of the other. I've made some good progress on the interior of Rainbow Caverns this year, but as you can see the exterior scenery is still far from finished. I'd like to finish the rest of the interior scenes this coming year and complete the rockwork cave openings on the exterior. As for Big Thunder Camp, it's planned as a major mining scene with several scratchbuilt structures. Sounds like a good candidate for my 2017 list. In 2016, I'll be happy to get the final track laid up there and all the wiring done for the lighting and animation to come.

Natural Arch Bridge

This is the connecting bit of scenery between Hanging Rock on the left and Rainbow Caverns on the right. It shouldn't take very long to finish up this scene once the branchline track to Big Thunder Camp is laid across the top of the bridge.

Hanging Rock

This scene is still a little less than half finished, mostly because the plans are not yet 100% firm in my mind. Olson & Furlow's place still needs LED lighting installed and a few more outlaw figures. A small depot made from an old combine car is planned for the near side of the tracks, while an ore tipple, shack and water tank will probably be against the cliffs on the other side. There's much more rockwork to be finished and a couple of tunnel portals to detail too. The tunnel interiors will be a project all their own.

Calico

Last but not least is the portable On18 Calico mini-layout that so far exists only in the planning stages. This almost qualifies as a substantial model railroad project all on its own and I could probably spend most of 2016 working on it and nothing else. The latest plan, shown above, is slightly simplified from the earlier figure eight scheme proposed. It hews a little closer to the Knott's Berry Farm inspiration now while promising to be easier to operate. My tests with N scale/On18 mechanisms told me that they didn't much like the 6% grade I had in mind before. This flat, simple loop now gives me room for an underground "Glory Hole" mining scene and some animated blasting on the other end. I have no illusions about finishing Calico in the coming year, but I would very much like to make a good start on it and at least get some On18 equipment running. Once again, time will tell.

To 2016 and Beyond

Once again I would like to give my sincere thanks to everyone who has been following along with my modeling efforts on the TMMC. You guys are the best and I'm just getting started. I wish each of you all the blessings of the season, a very merry Christmas and a happy, healthy and prosperous New Year. Feliz Navidad, amigos! Adios for now.
Related Posts Plugin for WordPress, Blogger...